SDMO R10C-Power Box, 9.8kVA efficient diesel Generator.
•
Click here to go to the list of efficient gas generators.
Frequency : 50 Hz
Voltage : 240V / Single Phase / 1 X 63 Amp socket
Power PRP : 7.2 kW / 9 kVA
Power ESP : 7.8 kW / 9.8 kVA
Fuel capacity : 44 litre
Autonomy : 17 hrs @ 75% load
21 hrs at 50% load
Noise level : 70 dB @ ONE meter at 75% load
Noise level : 62 dB @ Seven meters at 75% load
Dimentions : 1150mm X 804mm X 1155mm
Price : £6,950 + VAT & Delivery. Please call us on 01270 509 296.
| Standard Features |
Manufacturer / Model |
Mitsubishi S3L2-SD 4 stroke |
| Cylinder Arrangement |
In line |
| Displacement |
1.31L [79.9C.I.] |
| Bore and Stroke |
92mm X 78mm |
| Compression Ratio |
22 : 1 |
| Rated RPM |
1500 Rpm |
| Piston Speed |
4.6m/s [15.1ft./s] |
| Max standby power |
11.33kW [15BHP] |
| Frequency reg @ steady state BMEP |
+/- 2.5% |
| BMEP |
6.24bar [90psi] |
| Governor : Type |
MECA |
|
| Exhaust System |
Exhaust Gas Flow |
36.5L/s [77cfm] |
| Exhaust Temperature |
400°C [725°F] |
| Max back pressure |
700mm CE [28in. WG] |
| Fuel System |
100% (of the prime power) |
3.1L/h [0.8 gal/hr] |
| 75% (of the prime power) |
2.5L/h [0.7 gal/hr] |
| 50% (of the prime power) |
2.1L/h [0.6 gal/hr] |
| Max Fuel pump flow |
18L/h [4.8 gal/hr] |
| Oil System |
Total oil capacity with filters |
4.2L [1.1 gal] |
| Oil pressure low idle |
0.5 bar [7.2psi] |
| Oil pressure rated RPM |
4 bar [58.0psi] |
| Oil consumption 100% load |
0.018 L / h [0.0048 gal / hr] |
| Oil capacity carter |
3.7L [1.0 gal] |
| Thermal Balance |
Heat rejection to exhaust |
10kW [569 Btu/mn] |
| Radiated heat to ambiant |
1kW [57 Btu/mn] |
| Heat rejection to coolant |
9.8kW [557 Btu/mn] |
| Air intake |
Max intake restriction |
200mm CE [8in. WG] |
| Engine Air Flow |
13.6L/s [29cfm] |
| Coolant System |
Radiator & engine capacity |
4.2L [1.110 gal] |
| Max water temperature |
111°C [232°F] |
| Outlet water temperature |
93°C [199°F] |
| Fan Power |
0.3 kW |
| Fan air flow without restriction |
0.5m3/s [1060cfm] |
| Available restriction on air flow |
10mm CE [0.4in. WG] |
| Type of coolant |
Gencool |
| Thermostat |
82-95 °C |
| Gas System |
HC |
50 mg / Nm3 |
| CO |
140 mg / Nm3 |
| Nox |
1500 mg / Nm3 |
| PM |
80 mg / Nm3 |
Alternator Specifications
| Standard Features |
Manufacturer / Model |
MECC ALTE, NPE32-C/4 |
| Number of Phases |
1 |
| Power Factor (Cos Phi) |
1 |
| Altitude |
1000 |
| Pole : number |
4 |
| Exciter type |
Seperated |
| Insulation : class, temperature rise |
H / H |
| Voltage regulator |
SR7 / 2 |
| Bearing : number |
1 |
| Coupling |
Direct |
| Other Features |
Continous nominal rating @ 40°C |
10.8 kVA |
| Standby rating @ 27°C |
10% |
| Efficiencies @ 4 / 4 load |
79.6% |
| No Load excitation current (io) |
0.6 |
| Full Load excitation current (ic) |
1.8 |
| No Load excitation voltage (uc) |
19.5 |
Please feel free to contact us for any options or any enquiries regarding our products or prices
